高相电压小感应电流疲劳试验检测仪（耐焊弧疲劳试验检测仪）-（求算机调整）

High voltage low current tester (arc resistance tester) - (computer control)

新产名稱称：耐电弧试验机

Product name: electric arc resistance tester

护肤品型号规格：NDH-A

Product model: NDH - A

满足需要规则：GB/T 1411-2002《固体颗粒隔绝资料耐高压得很低的直流电弧光发出电的测试》（相等IEC  61621-1997）及ASTM D495等规则的标准设计构思开发的，并贴合IEC 149、UL 746A等校正的方式

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主要是适合范围之内及作用：

本检测机是以应运于三相电机、小家电和家居小家电等该行业的焊工用塑胶、聚酯树酯胶和电隔热带带漆等电隔热带带用料的耐脉冲特性认定，主用以固态物电隔热带带用料如：塑胶、pe膜、聚酯树酯、矿石、瓷砖、窗玻璃、电隔热带带油、电隔热带带漆、瓦楞纸板等媒质的耐脉冲特性测评；

本做检测的时候机由计算的机掌握正常运作，也可以提示 现行检测状态下及检测时间段，检测截止后并同步保存现行检测数据文件，并可打印文件.规定调查行业报告。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为前后左右合一设计，中下部为实操控制系统，上方为可靠性湿热试验箱。

2 本新产品运用*新智能化掌握的技术，根据选用软件程序（IEC或ASTM）可定时对其进行疲劳试验，并在PC上表明冲击试验整个过程和然而。

3 **稳定性保持良好，抗打扰程度强，测验精准度就越高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 脉冲通断日子精度：不大于 ±10ms

2 调压器数量：2kVA

3 功率做实验的时候相电压：12.5kV

4 试验检测线电压精确：±3%

5 电压的控制精确：±10%  直流电量测控制精度：1.5%

6 电极片对样品压为：（0.5±0.05）N

7 电极建筑材料建筑材料：钨棒

8 工业路程：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 操作大环境平均温度：（23±2）℃

10 操作环保水分子含量：（50±5）%

11 电源线：220V±5%  50Hz  10A

12 试验报告    技巧：   行业标准/美标/10 mA 连续性/20 mA 连续式/30 mA重复/40 mA不间断

13 耐压程序流程图正确：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 物品技术参数：

NDH-A    耐焊弧试验装置仪-微机管控

NDH-B    耐电弧放电检测仪-触控屏把控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！